12.48.130 Dimensional regulations for Canyon Park Subarea zones.
A. Purpose. To promote forms of development that reinforce and/or enhance the desired character of the Canyon Park Subarea zones.
B. Dimensional Regulations Table. The table below addresses the form and intensity of development specific to individual Canyon Park Subarea zones. The zone is located on the vertical columns and the form/intensity measure being addressed is located on the horizontal rows.
Measure | RMU-H | RMU-M | OR-H | OR-M | OR-L | E-M | E-L | Additional Provisions |
|---|---|---|---|---|---|---|---|---|
|
DEVELOPMENT INTENSITY AND HEIGHT | ||||||||
Minimum floor area ratio (FAR) | 0.6 | 0.5 | 0.6 | 0.5 | 0.4 | 0.5 | 0.4 | BMC 12.48.140. |
Maximum base FAR | 2.5 | 2 | 2.5 | 2 | 0.6 | 2 | 1 | BMC 12.48.140. |
Maximum FAR with incentives |
There is no set maximum FAR for each zone other than those parameters set forth for the incentive provisions in BMC 12.48.150, 12.48.180, and 12.48.190. | |||||||
|
Maximum building height (feet) |
85X |
85X |
85X |
85X |
55 |
100 |
100 | |
X85' and no more than 7 stories. | ||||||||
Maximum building coverage (%) |
There is no maximum percentage standard for building coverage and hard surface coverage. However, the building and hard surface coverage will be limited by setbacks, required landscaping and open space, compliance with storm water management provisions (see City of Bothell Storm Water Design Manual), critical areas provisions (see Chapter 14.04 BMC), and market conditions, and compliance with other zoning and site design regulations in this chapter. | |||||||
Maximum hard surface coverage (%) | ||||||||
(Ord. 2398 § 3, 2023; Ord. 2341 § 5 (Exh. A), 2020).