12.22.120 Sign permit – Contents of complete application.
An application for a sign permit is complete for the purposes of this section when it has been determined by the city to contain the information described below in addition to the standard application information required under BMC Title 11, Administration of Development Regulations. A complete application is sufficient for continued processing even though additional information may be required or modifications may subsequently be made. The city’s determination of completeness shall not preclude the city from requesting additional information or studies, either at the time of the notice of completeness or subsequently if new information is required or substantial changes in the application occur. A complete application shall contain, at a minimum:
A. Submittal Requirements for All Signs. One set of folded sign design plans showing the following. All plans must be drawn to scale and dimensioned accurately. Indicate existing and proposed signs.
1. A diagram, plan or illustration clearly depicting the sign dimensions and design and indicating the color(s) of the proposed sign(s), materials to be used and lighting (if any) to be utilized;
2. Necessary building or lot dimensions as required to calculate allowable sign area.
B. Submittal Requirements for Freestanding, Wall-Mounted and Projecting Signs. In addition to the above sign design plan, two sets of construction plans showing the listed items below are required for submittal. All plans must be drawn to scale and dimensioned accurately.
1. Freestanding.
a. Plot plan clearly indicating the location of the proposed sign relative to existing buildings and other structures and to streets/rights-of-way and property lines;
b. Foundation plan;
c. Anchoring/mounting system; and
d. Manufacturing specifications.
2. Wall-Mounted.
a. Location of sign on building;
b. Anchoring/mounting system; and
c. Manufacturing specifications.
3. Projecting.
a. Height above sidewalk;
b. Distance from curb;
c. Anchoring/mounting system; and
d. Manufacturing specifications.
C. Per RCW 18.27.110, signs requiring a building permit shall require that any contractor required by law to be registered with the state, provide verification and evidence of such registration at the time of permit issuance. (Ord. 1905 § 1, 2003; Ord. 1805 § 2, 2000).